Skip to content
Seal, insulate, and restore — no tear-off

Roof Coatings

Spray-applied roof restoration and foam systems that seal leaks, add insulation, and extend the life of any commercial or residential roof.

Overview

Certified applicator in protective suit spray-applying seamless white silicone roof coating on flat commercial roof
A failing roof doesn’t always need a costly tear-off. Our spray-applied roof coating and foam systems restore the roof you already have — sealing every seam, fastener, and penetration into one waterproof, reflective membrane.
Spray polyurethane foam (SPF) adds R-value and slope for drainage, while a silicone or polyurea topcoat reflects the sun, lowers cooling costs, and shrugs off ponding water. The result is a renewable roof that can be re-coated instead of replaced.
We work on flat and low-slope commercial roofs, metal buildings, and residential structures — all without the mess, disruption, and landfill waste of a full replacement.

Key Benefits

Accredited spray coating crew in white protective suits applying base and topcoat liquid membrane on roof deck

No Tear-Off

Coat over the existing roof and avoid disposal costs and downtime.

Stops Leaks

Monolithic membrane seals seams, fasteners, and penetrations.

Energy Savings

Reflective topcoats cut cooling loads and roof surface temps.

Renewable

Re-coat at the end of the warranty instead of replacing.

Our Process

Commercial metal and low-slope roof panels sealed with seamless waterproof elastomeric coating

Roof Inspection

We survey the roof, find leaks, and check moisture in the deck.

Clean & Repair

Power-wash, remove failed material, and repair problem areas.

Seam & Detail Sealing

Reinforce seams, penetrations, and flashings.

4

Base & Topcoat

Apply foam and/or base coat, then the reflective topcoat to spec.

Warranty & Docs

Final inspection and warranty documentation.

Common Applications

ArmorThane Mobile Coatings work truck and enclosed trailer rig delivering on-site commercial roof spray equipment

Flat & low-slope commercial roofs

Metal roofs & panels

Foam (SPF) roof systems

Modified bitumen & BUR restoration

Single-ply (TPO/EPDM) recover

Residential low- slope roofs

FAQs

Do I have to remove my old roof?

Usually not. Coating systems are designed to restore the existing roof, saving cost and landfill waste.

Yes — the seamless membrane seals the seams and penetrations where roofs typically fail.
Systems carry 10–15 year warranties and can be re-coated to extend life almost indefinitely.

Related Projects

A 60,000 sq ft aging TPO roof restored with a…

Quick Specs

Systems

Silicone / Polyurea / SPF

Reflectivity

High-SRI white

Slopes

Flat & low-slope

Warranty

10 – 15 years

Get a fast, honest estimate from an accredited applicator.
Ready when you are

Get an armor-tough coating quote today

Fully mobile, accredited, and insured — we bring the shop to your site. Tell us about your project and we’ll get you a fast, honest estimate.